Skip to content
Shop parts Basket0

Td5 water pump replacement

The Td5 pump sits behind the power steering pump and is driven by it. Coolant running from the weep hole below the power steering pump, or a growling bearing, means it is on its way out.

The job

  1. Drain the coolant from the drain plug on the coolant pump feed pipe.
  2. Remove the acoustic cover, the intake hose from the air flow meter to the turbo, and the intercooler pipe.
  3. For room, remove the oil filter and move the oil centrifuge housing back. Undo the turbo oil feed banjo bolt to let it move, keeping both copper washers.
  4. Remove the power steering pump from the front of the coolant pump, leaving its pipes connected.
  5. Remove the pump cover and the pump, clean the faces and fit the new pump with new seals.
  6. Rebuild in reverse, refill and bleed the cooling system, then check for leaks.
Torque figures
FixingTorque
Coolant pump24 Nm (18 lbf.ft)
Coolant pump cover10 Nm (7 lbf.ft)
Power steering pump to coolant pump25 Nm (18 lbf.ft)
Turbo oil feed banjo bolt, new washers25 Nm (18 lbf.ft)

Worth knowing

  • Use a six-point socket on the drain plug; they are often tight and easily rounded.
  • Refill using the Land Rover method in the cooling guide above.

Step-by-step photos of a Discovery 2 doing this job: discovery2.co.uk.

Rather have it done? Book it in with Dean

Rather have Dean do it? Fitting is at our Pelsall workshop, by appointment only.

Cooling parts
AIRTEC MotorsportAlliSport15 years working on Td5sDemand EngineeringThe price you see is the price you payWinchester GearsFitting at our Pelsall workshop, by appointmentLOF ClutchesNever more than buying directTD5Inside

Check your vehicle by VIN

We read your model, engine and year from the VIN and show the parts that fit.

On your V5C logbook (box E), on the plate by the passenger seat, or on the chassis by the front right wheel.