Choosing a Td5 clutch
A Td5 clutch works hard: towing, expedition weight, off-road work and, on a tuned engine, a lot more torque than it was designed for. LOF Clutches make three specs for the Td5. This is how to choose, based on LOF's own advice.
Single mass or dual mass flywheel
- The Td5 left the factory with a dual mass flywheel. You can keep one, fitting a new Valeo dual mass flywheel with the LOF kit to suit it, or change to the LOF single mass flywheel kit.
- LOF recommend the single mass kit for the Td5. It takes the extra torque of a tuned engine and does away with the dual mass flywheel, which wears out over time.
- Whichever you choose, LOF say to renew the flywheel every time the clutch is changed.
Pick the spec
| Your Td5 | Spec |
|---|---|
| Standard or mildly tuned. Daily driving, light towing and green laning | ROADspec (single mass kit only) |
| Stage 2 remap, regular towing, expedition weight, or a hard-working off-roader | POWERspec |
| Larger VNT or hybrid turbo, heavy off-roading and deep mud, or competition | VNT EXTREMEspec |
- POWERspec and VNT EXTREMEspec come with LOF's heavy duty EXTREMEspec release bearing.
- Fitting one of our TD5Inside VNT or hybrid turbo packages? Go for VNT EXTREMEspec.
While the gearbox is out
- A clutch change means taking the gearbox out, so it is the time to renew anything worn around it: the release fork, the release bearing guide (FTC4720) and the gearbox mounts. They are all in clutch release parts.
- LOF's POWERslave or POWERmaster uprate the clutch hydraulics, and the POWERspring pedal assist is available for the Defender. The POWERslave can't be fitted together with the POWERmaster.
Spec advice from LOF Clutches' own clutch selection guide. Not sure which suits your build? Ask Dean before you order.
TotalTd5 is an LOF approved installer, so we can supply and fit any of these kits at our Pelsall workshop.
Parts for this job
Rather have Dean do it? Fitting is at our Pelsall workshop, by appointment only.
LOF clutches


