Skip to content
Shop parts Basket0

Td5 fuel pressure regulator replacement

A diesel leak at the back of the engine on the driver's side is very often the fuel pressure regulator. The regulator was revised during production, and the Euro 3 type has an extra spill pipe, so order the one that matches your VIN.

The job

  1. Remove the engine acoustic cover and the engine lifting bracket for room.
  2. Unplug the sensor on the regulator and release the quick-release fuel pipes. Cap the open pipes straight away.
  3. Remove the three bolts, leaving one top bolt in until last so the regulator can't turn, and lift it off.
  4. Fit the new regulator with new seals and tighten its bolts to 25 Nm. Reconnect the pipes and plug.
  5. Prime the system, start the engine and check for leaks.
Torque figures
FixingTorque
Fuel pressure regulator25 Nm (18 lbf.ft)

Worth knowing

  • Small 1/4in drive tools and ratchet spanners make this a much easier job.

Step-by-step photos of a Discovery 2 doing this job: discovery2.co.uk.

Rather have it done? Book it in with Dean

Rather have Dean do it? Fitting is at our Pelsall workshop, by appointment only.

Engine and service parts
AIRTEC MotorsportAlliSport15 years working on Td5sDemand EngineeringThe price you see is the price you payWinchester GearsFitting at our Pelsall workshop, by appointmentLOF ClutchesNever more than buying directTD5Inside

Check your vehicle by VIN

We read your model, engine and year from the VIN and show the parts that fit.

On your V5C logbook (box E), on the plate by the passenger seat, or on the chassis by the front right wheel.