Skip to content
Shop parts Basket0

Td5 viscous fan pulley bearing

The fan pulley bearing carries the belt load and the weight of the fan. Noise or play at the fan means the bearing is worn. The Land Rover bearing is part number ERR5285.

The job

  1. Remove the top covers and the viscous fan (normal right-hand thread). Protect the radiator with a sheet of metal or card.
  2. Release the belt tensioner and remove the auxiliary belt, noting its route.
  3. Hold the shaft with a 12mm hex bit and remove the three pulley bolts and the pulley.
  4. The pulley flange is threadlocked onto the shaft. Gentle heat softens the threadlock; hold the flange with the fan spanner and unwind it.
  5. Press out the old bearing, fit the new one, refit the flange with fresh threadlock, then the pulley, belt and fan.
Torque figures
FixingTorque
Viscous fan nut45 Nm (33 lbf.ft)

Worth knowing

  • You need a 12mm hex bit and a Td5 fan spanner before you start.

Step-by-step photos of a Discovery 2 doing this job: discovery2.co.uk.

Rather have it done? Book it in with Dean

Rather have Dean do it? Fitting is at our Pelsall workshop, by appointment only.

Cooling parts
AIRTEC MotorsportAlliSport15 years working on Td5sDemand EngineeringThe price you see is the price you payWinchester GearsFitting at our Pelsall workshop, by appointmentLOF ClutchesNever more than buying directTD5Inside

Check your vehicle by VIN

We read your model, engine and year from the VIN and show the parts that fit.

On your V5C logbook (box E), on the plate by the passenger seat, or on the chassis by the front right wheel.