Skip to content
Shop parts Basket0

Td5 intercooler clean

Oily breather vapour collects in the intercooler and cuts its efficiency. Removing and cleaning it is part of Land Rover's service schedule, and worth doing on any Td5 with unknown history or before a remap.

The job

  1. Remove the acoustic cover, the upper fan cowl and the front grille (on the Discovery 2, the indicators and lower headlamp trims come off first).
  2. Disconnect the two intercooler hoses and lift the intercooler out. Land Rover removes the viscous fan for this; with care it can come out without.
  3. Flush the inside with a suitable degreaser until it runs clean, then rinse and let it dry fully.
  4. Refit with the hose clips tight, then check for boost leaks on a test drive.

Worth knowing

  • If a lot of oil comes out, check the breather system and the turbo seals before refitting.
  • An AIRTEC uprated intercooler is worth considering if you tow or are planning a remap.

Step-by-step photos of a Discovery 2 doing this job: discovery2.co.uk.

Rather have it done? Book it in with Dean

Rather have Dean do it? Fitting is at our Pelsall workshop, by appointment only.

Intercoolers
AIRTEC MotorsportAlliSport15 years working on Td5sDemand EngineeringThe price you see is the price you payWinchester GearsFitting at our Pelsall workshop, by appointmentLOF ClutchesNever more than buying directTD5Inside

Check your vehicle by VIN

We read your model, engine and year from the VIN and show the parts that fit.

On your V5C logbook (box E), on the plate by the passenger seat, or on the chassis by the front right wheel.