It started with a whistle
My first Td5 whistled under boost. Anyone who owns one knows the sound. The garage said manifold, fitted another standard one, and a few months later the whistle was back. Most people put up with it. I'm an engineer, so I couldn't.

An engineer first
I started out as an engineer at Mars, the chocolate maker, then moved into the motor industry. I spent many years at Jaguar Land Rover, and I also worked directly for BMW, specialising in the SVR engine and the Rolls-Royce V12 production lines. Chocolate, Land Rovers and V12s have more in common than you'd think. On a production line, you don't keep swapping parts until a problem goes away. You find out why it failed, you fix the cause, and you make sure it doesn't come back.
The Td5 suits that way of thinking. It was developed in the late nineties, while BMW owned Land Rover, and it's a brilliant engine with a handful of well known weak spots. Sort those properly and it will outlast the rest of the vehicle.
Fixing it properly
The whistle came from the manifold warping with heat and pulling against its studs. So I took the webbing out, had the manifold heat treated so it stays flat, skimmed it true, and paired it with longer high-tensile studs, stainless spacers and a proper gasket kit. That became the TotalTd5 manifold kit. It's still the part I'm best known for, and it goes out all over the UK and abroad.
The same thinking runs through everything I make: uprated head studs (TD5Inside stock them too), CNC ported heads, billet pulleys, trussed axles, intakes and exhausts.
"It's more than a sale. It's about getting people what they actually want, and not letting them make a bad decision, or a worse one."
15 years on, it's still about the owner
No two owners want the same thing. One tows a horsebox every weekend. Another wants a quick road car that never sees mud. Someone else is building for Wales, wading and winching. Each needs a different mix of turbo, clutch, gearbox, transfer box, brakes and cooling, and getting the balance wrong costs money and reliability.
That's why I don't sell "stage 1, 2 and 3". We start with what you want the vehicle to do, then build the spec around it. I work with suppliers I trust, including TD5Inside for turbos and remaps, LOF Clutches, Winchester Gears, AlliSport and AIRTEC, so you have one person looking after the whole job.
Come and talk to me
Pick up the phone and you get me. I'm always happy to talk through an idea, even if the answer is that you don't need to spend anything yet. Parts ship to the UK and EU, and further afield by quote. Fitting is at my workshop in Pelsall, near Walsall, by appointment only.
Dean Lapham, TotalTd5
Plan your build See the builds
Preview: a photo of Dean in the workshop goes here when we have one.